Detergent VER-QUIM2

How to use

For stains in surfaces that have a substantial thickness use pure spraying the stain and wait for emulsion (from one to ten minutes), afterwards rinse with pressurized water. It is important to remark that VER-QUIM2 has its maximum efficacy between 15º and 60º.

For stains from dirt caused from normal daily activities it is used diluted with water between 40% and 50%.

An exact table of the dilutions of the product cannot be offered, since each dirt depends on the type of oils, hydrocarbons, etc., and the surfaces where the stain is, however we can ensure that when applied correctly the product is efficient and cleans all kind of surfaces.

In terminals of reception and supply of fuels:

-Storage tanks and walls the product is used depending on the mechanic means used by the cleaning company.

-The entire plant, especially the area where trucks are loaded, is sprayed and afterwards swept with pressurized water, it is not necessary to spray the entire area since when water spreads together with the product it has the same function as if it had been sprayed.

Vessels:

-The waterline, bilges, machine rooms etc., (the cleaning can be done with the vessel inside of the water).

We have remarked the most ordinary applications, but the product can be used in any surface or area affected by the described dirt, and in the dilutions that each stain requires.

For other usages please contact our technical department through the CONTACT section in this website or through the telephone number +34 973-313971, or through e-mail  info@purgatquimica.com